97
IP Settings
Advanced
Overview
The Advanced tab configures Active Standby (SCS and SDS8/16/32C models only), DNS update,
IPv6 Advertising Router settings, and the Ethernet interface(s) hardware speed and duplex.
Configure the parameters in the Advanced tab only if:
zyou have already set up Dynamic DNS with DynDNS.com
zyou want to enable Active Standby (SCS models only)
zyou want to specify the line speed and duplex
zyou want the IOLAN to act as an IPv6 Advertising Router
Field Descriptions
Configure the appropriate parameters:
Register Address in
DNS
When this parameter is set, the Terminal Server will provide the
DHCP/DHCPv6 server with a fully qualified domain name (FQDN), so that the
DHCP/DHCPv6 server can update the network's DNS server with the newly
assigned IP address.
Default: Disabled
Maximum
Transmission Unit
(MTU)
The Maximum Transmission Unit (MTU) size of an IP frame that will be sent
over the network. If your IOLAN has more then one Ethernet interface each
interface can be set separately, however only one MTU size can be set for both
IPV4 or IPV6 frames.
MTU IPV4: 68-1500 bytes
MTU IPV6: 68-1500 bytes