4Put the back cover back on your phone: hook the front housing onto the hinges on

the top of the phone (1), then press the bottom down until latch catches (2).

5 Remove the protective film before using the phone.

Enter the PIN code

1To switch on the phone, press and hold the )key.

2When you switch on the phone, you may be prompted to enter the PIN code, which is the 4 to 8-digit secret code of your SIM card to protect it from abusive use. It is preconfigured and communicated to you by your operator or retailer. To personalise the PIN code, see “Change codes” page 30.

L If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it, you must request the PUK code from your operator.

3Enter your PIN code. If you make a mistake, press e. Then confirm by pressing ,or #.

Set date and time

As prompted by the phone at first switch on, set the date by pressing the appropriate numeric keys (press eto erase a number), then press ,to validate. Proceed in the same way to set the time.

L For complete date and time options, see page 31.

Copy of the SIM phonebook

L If you do not copy the SIM phonebook at very first switch, you will be able to do it directly from the phonebook menu (see page 41).

If you had a mobile phone before and are using the same SIM card, the card might contain all or part of your current phonebook. The mobile phone detects this and a message asks you if you want to copy your SIM phonebook onto the built-in phonebook (see below). Press eto cancel or ,to accept.

Accept the copy

Press ,to accept the copy of the SIM phonebook onto your phone. Once the copy is done, the phonebook located on your phone is automatically set as

Getting

9

started

 

Page 11
Image 11
Philips 625 manual Copy of the SIM phonebook, Enter the PIN code, Set date and time, Accept the copy