73
WAP services
Each of these settings allows you to:
- Visualise all paramete rs of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.), either GSM or
GPRS,
- Activate the selected profile (which then becomes the default profile
and is used for connection when pressing
@
),
- Change the parameters of the WAP profiles as described below.
L
Some pre-configured profiles might be locked, preventing re-programming.
Change name
Allows you to enter or change the name of the selected WAP profile. Press
,
,
enter the name of your choice and press
,
to confirm.
GSM settings
Allows you to enter or change the GMS settings and gives you access to the
following items:
---
Login and Password allow you to enter the login and password needed. In both
cases, enter the infor mation and press
,
to confirm.
Phone Number allows you to enter the phone number needed to establish a
connection with your WAP Service Provider (ISP). Select Phone numbers and
press
,
, then press
+
or
-
to select:
- ISDN No. to enter an ISDN ISP number,
OR
- Analogic No. to enter an analogic number, then press
,
.
Enter the "+" sign followed by the number provided by your operator and press
,
.
L
Contact your operator to know what type of number you should select.
Inactivity time allows you to enter an inactivity time period after which the
phone automatically ends the WAP session (if a connection was in progress)
and returns to idle screen. Select Inactivity time and press
,
, then enter a
value (in second) of over 30 s. and press
,
.
GPRS settings
Allows you to enter or change the GPRS settings and gives you access to the
following items:
Change name
GSM settings
Login Password Phone number Inactivity time
GPRS settings
Fisio625_GB_4311 255 53832.book Page 73 Vendredi, 25. octobre 2002 6:10 18