Philips DTR1000/00M manual Connecting your Digital receiver

5 Connecting your Digital receiver

There are several ways you can connect and incorporate your digital receiver into your existing audio / video equipment set up.

Warning before starting to connect:

-Unplug all equipment (TV set as well as VCR and / or DVD if required) from the mains.

-Do not connect your digital receiver to mains supply now.

-Check your current wiring because you might keep existing connections of your current Audio / Video set up.

-Choose the relevant connecting method for incorporating your digital receiver into your existing Audio / Video set up. Please read chapters 5.1 and 5.2.

5.1 Connecting to a TV fitted with one SCART socket

Incorporate your receiver in your existing installation as shown below:

Aerial previously in the back of your TV or Video

SCART lead (supplied)

TV set

EXT1

English

RF lead (supplied)

-Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.

-Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your TV by means of the RF coaxial lead supplied with your digital receiver.

-Connect the "TV" SCART socket of your digital receiver to the "EXT1" SCART socket of your TV set by means of the SCART lead supplied with your digital receiver.

-Plug all your equipment, excluding your digital receiver, into the mains.

-Switch on your TV and select a channel.

C O N N E C T I N G YO U R D I G I TA L R E C E I V E R 9