Philips DTR1000/00M manual Product description, Front view, Product Description

3 Product description

3.1 Front view

12

						3	4	5	6
1	LOW POWER button:			Switch receiver ON or into low power mode.
				Reset the receiver, in case of hanging up, after a 5 second
				keypress.
2	TV/RADIO button:			Toggle between TV and Radio mode.
3	"-" button:			Channel down.
4	Three colours LED indicator:			Display receiver status (see status indicator table).
5	Red LED indicator:			Display receiver status (see status indicator table)
				Blink at remote control command reception.
6	"+" button:			Channel up.
				Status indicator table
	Mode	Receiver	Low power	Standby	TV mode	Radio	Software			Timer
LED		off mains	mode	mode		mode	update (1)			running (2)
4 Left hand LED		Off	Off	Orange	Green	Blinking		Off		Green or
(3 colours)						Green /				Orange
						Orange				(in standby mode)
5 Right hand		Off	Red	Off	Off	Off	Blinking			Red
LED (Red)								red		(blinking if
										pressing a button)

(1)If you have put your receiver in "Standby" or "Low power" mode and red, right hand LED is blinking … this indicates that a free over-the-air upgrade of your receiver is taking place. Do not interrupt this operation. Wait until the blinking LED stops and the left hand LED is either orange or red (signalling either standby mode or low power mode). You can now continue with normal operation.

(2)To cancel a running timer, press button sequence: TIMER + 0.

English

PRODUCT DESCRIPTION 5