Philips DTR1000/00M manual English

English

-Plug your digital receiver into the mains. Your digital receiver will display the WELCOME screen(the left-hand LED will be illuminated green).

-Go to chapter 6 to proceed with the channel scan of your digital receiver.

If the WELCOME screen is not displayed, press two times the TV/STB button to get the screen displayed.

Note:

With this connection set up you can:

-Watch digital terrestrial TV by means of your Digital receiver.

-Continue watching analogue TV by means of your TV.

5.2 Connecting to a TV and a VCR both fitted with one SCART socket

Incorporate your receiver in your existing installation as shown below:

-Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.

-Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your VCR by means of the RF coaxial lead supplied with your digital receiver.

-Connect the "RF OUT" socket of your VCR to the "Aerial input" socket of your TV by means of a RF coaxial lead.

-Connect the "TV" SCART socket of your digital receiver to the "EXT1" SCART socket of your TV by means of the SCART lead supplied with your digital receiver.

-Connect the "VCR" SCART socket of your digital receiver to the "EXT1" SCART socket of your VCR (so called OUT) by means of a SCART lead.

10C O N N E C T I N G YO U R D I G I TA L R E C E I V E R