Philips DTR1000 More about Recording / Easy Recording VCR control, Connection for Easy recording

English

10.4 More about Recording / Easy Recording - VCR control

10.4.1 Connection for Easy recording

This connection allows automatic recording without necessity of programming your VCR. Prior deciding for this connection method:

-Consult the user manual of your VCR / DVD Recorder to check if and how this feature is supported. Most Philips VCR and DVD Recorders support one of the two easy recording options.

-Verify that your TV and VCR both have two SCART sockets.

Incorporate your receiver in your existing installation as shown below:

-Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.

-Connect the "RF OUT" socket of your digital receiver to the "Aerial input" socket of your VCR by means of the RF coaxial lead supplied with your digital receiver.

RF lead

(supplied)

TV set

EXT1 EXT2

Video recorder

EXT1 (OUT) EXT2 (IN)

-Connect the "RF OUT" socket of your VCR to the "Aerial input" socket of your TV by means of a RF coaxial lead.

-Connect the "TV" SCART socket of your digital receiver to the "EXT1" SCART socket of your TV by means of the SCART lead supplied with your digital receiver.

-Connect the "VCR" SCART socket of your digital receiver to the "EXT2" SCART socket of your VCR (so called "IN") by means of a SCART lead.

-Connect the "EXT1" SCART socket of your VCR (so called "OUT") to the "EXT2" SCART socket of your TV by means of a SCART lead.

-Plug all your equipment, excluding your digital receiver, into the mains.

32 ADVANCED SETTINGS