Philips DTR1000/00M manual Connecting Your Digital Receiver

-Plug all your equipment, excluding your digital receiver, into the mains.

-Switch on your TV and select a channel.

-Plug your digital receiver into the mains. Your digital receiver will display the WELCOME screen (the left -hand LED will be illuminated green).

-Go to chapter 6 to proceed with the channel scan of your digital receiver

If the WELCOME screen is not displayed, press two times the TV/STB button to get the screen displayed.

Note:

1 This connection also applies if your VCR has two SCART sockets.

2If you have a S-Video VCR refer to chapter 8.2.1.1 for further settings and consult the user manual of your VCR.

3With this connection set up you can:

-Watch digital TV while you record analogue TV.

-Watch analogue TV while you record digital TV.

-Record the digital TV channel you are watching.

-Watch Play Back from your VCR.

5.3Connecting to your HiFi / Audio receiver equipment. (Analogue / Digital)

Depending on your HiFi / Audio receiver equipment, you might have several options to connect your digital receiver.

-Analogue connection

Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio equipment by means of a double CINCH cable (not supplied). Consult the user manual of your HiFi/Audio receiver equipment to choose the proper analogue audio inputs.

Note: With this connection set up you can control the audio volume up/down and mute with the remote control of your digital receiver and alternatively with your HiFi's remote control.

-Digital connection

Connect the audio "DIGITAL" output socket to the relevant digital audio input socket of your audio equipment by means of a single CINCH cable (not supplied). Consult the user manual of your HiFi/Audio receiver equipment to choose the proper digital audio input.

Note: With this connection set up you can only control the audio volume up/down and mute with your HiFi / Audio Receiver remote control, refer to the relevant user manual.

5.4Connection of a Video projector to your receiver to watch Digital TV programmes on a video projector

Connect the "TV" SCART socket of your digital receiver, to your Video projector.

A video projector is often fed with S-Video format video signals, if this is the case with your projector, follow the instructions below for connection and installation:

-Connect a SCART to the S Video adapter between the TV SCART of your digital receiver and the S VIDEO input of your video projector.

-Installation: Refer to chapters 8.2, 8.2.1 and 8.2.1.1 to change the "TV/VCR output" setting of your digital receiver to SVIDEO/PAL-CVBS.

English

CONNECTING YOUR DIGITAL RECEIVER 11