Philips DVDR3360H Connecting the audio cables, Option 1 Using the analogue audio sockets, English

Step 1: Basic Recorder Connections (continued)

English

OR OR

AV amplifier/receiver

Connecting the audio cables

Option 2: Using the digital audio socket (Optical or Coaxial)

This connection enables you to listen to the playback from this recorder. However, this connection is not required if this recorder is connected to the TV using the Scart or HDMI connectors.

Option 1: Using the analogue audio sockets

You can connect the recorder to a two channel stereo system (mini system, TV) or receiver in order to enjoy the stereo sound system.

Use an audio cable (red/white - not supplied) to connect the OUT2- AUDIO L/R sockets to the audio input sockets of the connected device.

Helpful Hint:

–If you have connected this recorder to your TV using the OUT1-Y PR PB sockets, then connect the audio cables to the OUT1- AUDIO L/R sockets as described in page 19.

You can connect the recorder to an AV amplifier/receiver in order to enjoy multichannel surround sound.

Use a coaxial cable (not supplied) to connect the COAXIAL OUT socket to the digital coaxial input socket (or labelled as COAXIAL IN or DIGITAL IN) of the connected device.

–an A/V receiver or amplifier with a digital multi-channel sound decoder.

–a receiver with two-channel digital stereo (PCM).

OR

Use an optical fibre-optic cable (not supplied) to connect the OPTICAL OUT socket to the optical input socket of the connected device.

Make sure that both plugs are fully inserted (until a click is heard).

TIPS: For option 2 connection, you have to set the appropriate Digital Audio Output setting, see page 85. Otherwise, no sound or interference may occur.

20