Record to Hard Disk or recordable DVD (continued)
F Press the Blue button on the remote control for { AUTO REC }.
Auto Record of DV input to hard disk
Record only new DV updates
Record entire DV tape
Cancel
Note: The { AUTO REC } option can only be activated while in camcorder play or pause mode.
To copy the entire DV tape
Select { Record entire DV tape } in the menu and press OK to confirm.
The camcorder will rewind the tape and start recording from the beginning.
To copy the newly recorded contents from the DV tape
Select { Record only new DV updates } in the menu and press OK to confirm.
The recordings which are later than the date and time set in the { DV Specials } (see page 76) will be recorded onto the HDD or recordable DVD.
G To use the recorder’s remote control to control the camcorder operation during recording, press the Green button on the remote control for { DV CONTROL }.
The DV control buttons display on the screen.
H You can pause, play, stop, fast forward or rewind the scene using the
keys on the recorder’s remote control to select the respective control buttons on the screen.
I To stop the recording, press (STOP). Both the recorder and camcorder will
stop.
J To exit, press TUNER.
Helpful Hints:
–Some camcorders cannot be controlled using this recorder’s remote control.
–Mixing of PAL and NTSC video format recording on a same recordable DVD is not possible.
–If a part of the tape is blank, the recorder will pause recording. Recording will restart automatically when there is a recordable signal. However, if there is more than 5 (fi ve) minutes of blank tape, the recording will end automatically.
–A chapter marker is inserted every time when there is a break in the time code on the DV tape. This happens when the recording is stopped or paused then restarted.
English
+RW | CAM 2 |
DV CONTROL | AUTOREC |
TIPS: Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD, see page 38.
47
