Philips DVDR3360H Set-up the GUIDE Plus+ system, Language / Country, Postal code, English, Cable

Step 4: Set-up the GUIDE Plus+ system

English

Your recorder is equipped with the GUIDE Plus+ system. This system offers a free interactive programme guide that lists all the TV programmes available in your area. Before you can enjoy this feature, you have to define your geographic location and your current setup devices in order to receive correct GUIDE Plus+ TV listing data.

IMPORTANT!

To use the GUIDE Plus+ system, the analogue tuner has to be installed properly.

{Language } / { Country }

These settings will be taken from the basic installation set up.

{Postal code }

Press OK to access the entry menu. Use keys to enter the local postal code

and use keys to move to previous or next entry field.

Note: The postal code you enter must be correct, and must represent a postal code in the identified country. If not, you will receive no or incorrect TV listings data.

{External Receiver 1/2/3 }

A If an introduction to the GUIDE Plus+ system appears on the TV, read the contents and press OK to continue.

The GUIDE Plus+ basic setup menu appears.

Otherwise, press GUIDE on the remote control, then press and press NEXTÉ repeatedly until you select the { Setup } menu bar.

B Press to select { Basic Setup } in the menu and press OK to access the setup screen.

Note: If you do not have an external receiver connected, leave the fields as “None” and press the Red button on the remote control to exit the menu. Go direct to step H.

You can connect up to three external receivers (e.g., satellite receiver, cable box) to this recorder. Complete the installation of the external receiver as follows:

a) Use keys to select External Receiver 1, 2 or 3 and press OK.

b)Press OK again to continue. Select the type of the external receiver and press OK.

{Cable }

Select this for cable receiver, cable box.

{Satellite }

Select this for satellite receiver.

{Terrestrial }

Select this for digital terrestrial decoder box.

c) Select the service provider from the list and press OK.

{None }

Select this if you do not have a provider.

d)Select the brand of your receiver from the list and press OK.

{None }

Select this if you do not find your brand.

TIPS: After completing the setup, leave the recorder in standby mode and turn on your external receivers overnight to receive the TV listing data.

28