Record to Hard Disk
IMPORTANT!
Unrecordable contents
Contents with copy protection cannot be recorded on this recorder. When the recorder receives a copy guard signal, it will continue to record. However, during playback, only blank or grey picture will be displayed.
Recording TV programmes
Follow the instructions below to record the TV programmes onto the HDD, where you can store for future viewing and copy to a recordable DVD disc if required.
Record the current TV programme
A Press INFO m on the remote control to display the Time Shift video bar.
B Press (RECORD) on the remote control.
The current programme will be marked for recording.
In the countries where no GUIDE Plus+ TV listings data is available or no such data is stored, it will start recording the current channel from the last channel marker onwards for the next 6 (six) hours.
BACK
Press (RECORD) again will set the recording time length. Each subsequent press increases the recording time by 30- minute, up to a maximum of 6 (six) hours.
C You can turn off your TV and the recorder to standby mode while recording.
The recorder will continue recording and stop at the designated end time.
If you wish to stop the recording before the scheduled time, press (STOP).
Record a specific section of TV programmes
A Press INFO m on the remote control to display the Time Shift video bar.
B Use | keys to select a TV programme |
that can be found in the temporary HDD | |
storage. |
|
C Use | keys to search for the beginning |
of the scene where you want to start recording, then press Å(PAUSE).
D Press the Red button on the remote control to start recording from here.
E Press
F Press NEXTÉ to search for the point where you want to end the recording and press (STOP) on the remote control.
A red marking will be visible on the video bar to indicate the marked recording.
English
TIPS: Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD, see page 38.
39
