General Information
Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the number of frames per second than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
Before you start...
–Ensure that you have connected this recorder to a progressive scan TV using the Y Pb Pr connection (see page 19).
–Ensure that you have completed the basic installation and
A Turn on the TV to the correct programme number for the recorder (e.g. ‘EXT’, ‘0’, ‘AV’).
B Turn on the recorder and press SYSTEM on the remote control.
The system setup menu appears.
C Press to select { Setup } and press NEXTÉ to select { Video output }.
A warning message appears. Press OK to continue.
|
| Video output |
Setup |
|
|
TV shape |
| |
Black level |
|
|
Horizontal |
|
|
Video output |
|
|
Progressive | On | |
D Press to highlight { Progressive } and press NEXTÉ to access. Press to select { On }.
E Read the instructions on the TV and confirm your action by pressing OK.
The setup is now completed and you can start to enjoy the high quality picture.
Otherwise, select { Cancel } and press OK to go back to the previous menu.
F To exit the menu, press SYSTEM.
If no picture is displayed:
A Disconnect the recorder’s ~MAINS from the power supply.
BHold down
on the recorder whilst reconnecting its ~MAINS to the power supply.
Helpful Hint:
–There are some progressive scan TVs and
–If the HDMI video output is turned on, the progressive output signal will be disabled.
Copyright notice
The making of unauthorised copies of
English
87
