Philips DVDR3360H user manual Childlock, Auto resume

System Menu Options (continued)

Access settings (underlined options are the factory default settings)

		You will be prompted to enter the four-digit pin code.
		– When doing this for the first time, use the alphanumeric keypad 0-9
		on the remote control to enter any four-digit pin code you prefer.
		– If you forget your four-digit pin code, key in ‘1504’.Then enter any
		four-digit you prefer and enter the same pin code again to confirm it.
Childlock		With this feature, you can prevent children from viewing certain discs or
		the recorded titles in the HDD. When this feature is enabled, it will
		appear as { CHILDLOCK } at the bottom of the coloured options screen
		whenever you select a title in the content menu. You can press the
		Yellow button on the remote control to set the childlock on or off.
		Note: This recorder can memorise settings for 50 discs.
		{ On }	– Turns on child lock function.
			A four-digit pin code must be entered in order to play
			the locked disc or title in the HDD.
		{ Off }	– All discs can be played.
		Use the alphanumeric keypad 0-9to enter your new four-digit pin code.
Change pin
		You must enter the same pin code again to confirm it.
Enter PIN of your choice		To cancel your change, press to select { Cancel } in the menu and
This will be used to access locked features.		press OK on the remote control.
Pin Code	####

Cancel

English

Features settings (underlined options are the factory default settings)

Auto resume	With this feature, you can resume playback of the disc from its last stopped
	point. This applies to the last 20 DVDs and Video CDs you played.
	{ Off }	–	The disc will always start from the beginning when you
			load a disc or start playback.
	{ On }	–	Turns on auto resume mode.
			When playback stopped, the content menu will appear.
			To resume playback, press OK while selecting the title
			in the menu.
	Note: Pressing		(PLAY) will cancel the resume mode and start

playback from the beginning of the disc.

77