Step 3: Installation and Set-up (continued)
E The Channel Search menu appears on the TV. Select { Search channels } in the menu and press OK on the remote control to start analogue channel search.
ÎIt takes a few minutes to complete.
CHANNEL SEARCH
This will search and install all Analogue and
Digital channels and services.
Search channels | Start |
Skip search | OK |
Disc tray will not open until setup is completed
Note: Make sure you have successfully made all the required connections to this recorder, the TV and Satellite Receiver/Cable Box (if any) and turned them on. The channel search will detect the signals and save all the available programme channels.
If no channels are found :
–Try the auto TV channel installation after completing the basic setup, see page 81.
F The recorder continues with the digital channel search (TV and radio).
CHANNEL SEARCH
Digital channel search.
This may take a few minutes. Please wait
Search channels | 15 |
Skip search
Disc tray will not open until setup is completed
G After the channel search is finished, the number of found and stored channels (analogue TV, digital TV and digital radio) appear, press OK to continue.
CHANNEL SEARCH
Analogue TV channels found : XX
Digital TV channels found : XX
Digital Radio channels found : XX
Check signal
Restart Search
Continue 
OK
H The time and date menu appears.
TIME AND DATE
Please check the Time (hh:mm) and Date and correct if necessary.
Time 
20:01
Date |
Done 
OK
Disc tray will not open until setup is completed
i.If the information is correct, select
{ Done } in the menu and press OK.
ii.If changes are required, use the alphanumeric keypad
I The basic installation is now completed.
Easy setup completed. Continue with the GUIDE Plus+ installation?
Continue 
OK
Donot install now | OK |
Disc tray will not open until setup is completed
i.Select { Continue } in the menu and press OK to start the GUIDE Plus+ installation. See next page for the complete detailed setup.
ii.Select { Do not install now } in the menu to skip the GUIDE Plus+ installation. The next time when you want to install the GUIDE Plus+ system, press GUIDE on the remote control, see next page.
J Wait until the recorder has finished initialising the system, then press OK to exit.
You may now enjoy using this recorder.
Helpful Hint:
–The TV programme listings do not appear on the GUIDE Plus+ system as soon as you complete the basic installation. It may take up to 24 hours to receive TV listings data.
English
TIPS: After completing the basic installation, you can change or update your settings using the system setup menu, see page 78~86.
27
