Philips DVDR3360H user manual Analogue Channel settings, Auto search Follow TV Sort, Favourites

System Menu Options (continued)

Analogue Channel settings

English

Analogue Ch.

Setup

Auto search

Follow TV

Sort

Favourites

Although this recorder selects all the available analogue TV channels during basic installation, you may want to repeat the process later if more channels become available in your area or if you are reinstalling the recorder.

APress SYSTEM on the remote control. Select { Setup } in the menu and press NEXTÉ repeatedly to select { Analogue Ch. }.

B Press repeatedly to select the following settings in the menu and press NEXTÉ to enter its options.

Auto search

Follow TV

Sort

Press OK on the remote control to start the automatic TV channel search process and replace all previously stored analogue TV channels. This process may take several minutes.

This feature is only available if you have connected this recorder to your TV using the EXT1 TO TV-I/O scart socket. It allows you to change the order of the TV channels (analogue only) stored in your recorder to match the order on the TV.

1)Press OK to confirm the message on the TV, ‘TV 01’ will appear on the display panel. Use the TV’s remote control to select programme number {1} at your TV, then press OK on the recorder’s remote control.

–If the recorder finds the same TV channel as on the TV, it stores it as ‘P01’. ‘TV 02’ will then appear on the display panel.

–If no video signal is received from the TV, ‘NO TV’ will appear.

2)Use the TV’s remote control to select programme number {2} at your TV, then press OK on the recorder’s remote control.

Repeat the above steps until you have assigned all the TV channels.

According to your preference, you can change the order of the stored TV channels.

001	ARD	004	TELET		004	CHAN
002	TELET	005	CHAN		005	RTL4
003	ORF2 ---ORF2	006	RTL4	ORF2	006	ORF2
004	TELET	007	SBS6		007	SBS6

Favourites

Favourites

1

2 NBC

3

4

5

6MTV

7

1)	Use	keys to select the TV channel that you want to move and
	press OK to confirm.
2)	Use	keys to shift the TV channel to the desired position and
	press OK to place the TV channel at the current position.
Press OK to mark your favourite TV channels for quick access by using the
channel up/down button on the remote control.
		–	The TV channels can be accessed using the
			CH + − on the remote control.
		–	The TV channels can only be accessed by pressing
			the corresponding number button on the remote
			control.

81