Philips DVDR3360H user manual Digital output, Pcm, Disable

System Menu Options (continued)

Video Output settings (underlined options are the factory default settings)

English

Noise red. (reduction)

Sharpness

Video settings for Pixel Plus only

Use	keys to set the level of noise reduction and press OK to confirm
the setting.
Use	keys to adjust the level of picture sharpness and press OK to

confirm the setting.

Note: The above two options are not visible unless the Pixel Plus feature is turned on.

Audio Output settings (underlined options are the factory default settings)

Digital output	This setting is only required if you are using the recorder’s COAXIAL/
	OPTICAL OUT socket to connect other audio/video device.
	{ All }	– Select this if the connected device has a built-in Multi-
		Channel decoder that supports one of the multi-
		channel audio format (Dolby Digital, MPEG-2).
	{ PCM }	– Select this if the connected device is not capable of
		decoding multi-channel audio. The system will convert
		the Dolby Digital and MPEG-2 multi-channel signals to
		PCM (Pulse Code Modulation).
	{ Off }	– Select this to deactivate the digital audio output. For
		example, if you use the AUDIO OUT sockets to
		connect this recorder to a TV or Stereo system.
HDMI	This setting is only required if you are using the recorder’s HDMI OUT
	socket to connect your TV or other display device.
	{ Auto }	– Select this if you want to enjoy the multi-channel audio
		output through your HDMI connection.
	{ Disable }	– Select this if the connected device is not able to
		output the sound through the HDMI connection or the
		playback audio format is not supported by HDMI
		connection (e.g. projector, SACD).

Note: Make sure that you have alternative audio connection from the recorder to your TV or the display device for the sound output (see page 20).

Helpful Hint:

–It is not possible to listen to SACDs or copy-controlled DVD-Audio CPPM (Content Protection for Playable Media) sources using the HDMI connection.

85