English
System Menu Options (continued)
Analogue Channel settings - manual search
| Analogue Ch. |
Setup |
|
Entry mode | MHz |
Entry | 167.5 MHz |
Preset | P 04 |
Preset name | RTL4 |
Decoder | Off | On |
TV system |
| |
Nicam | Off | On |
Fine t une |
|
|
In some cases, not all of the available TV channels may have been found and stored during basic installation. In this case, you will need to search for and store the missing or coded TV channels manually.
APress SYSTEM on the remote control. Select { Setup } in the menu and press NEXTÉ repeatedly to select { Analogue Ch. }.
B Press repeatedly to select the following settings in the menu and press NEXTÉ to enter its options.
STORE | SEARCH |
Entry Mode
Entry
Preset
Preset name
Decoder
TV system
NICAM
Finetune
Select manual search based on channel allocation or frequency entry
{Channel, S. Channel (Special channel), MHz (frequency) }. Note: S. Channel refers to specified hyperband channels.
–Use the alphanumeric keypad
OR
–Press the Blue button on the remote control for { SEARCH }, once you have found the correct frequency/channel, press the Green button for { STORE }.
Use the alphanumeric keypad
{STORE }.
Use the alphanumeric keypad
All channels can have a name of up to four characters.
If the current TV channel is transmitted by coded TV signals that can only be viewed properly with a decoder which is connected to the
EXT2
{ On } | – | Select this to allocate the connected decoder to this |
|
| TV channel. |
{ Off } | – | Turn off the decoder feature. |
Set the TV system that produces the least distortion of picture and sound. See last page “TV System Guide” for more information.
NICAM is a digital sound transmission system. It can transmit either one stereo channel or two separate mono channels.
{ On } | – | Improve the sound transmission of the TV channel. |
{ Off } | – | Select this if the reception is poor and the sound is |
|
| distorted. |
Select this to
Use | keys to adjust the frequency and press OK to confirm. |
82