Troubleshooting (continued)

Problem (Recording)

Solution

English

The message ‘Insert recordable disc’ appears.

The message ‘Collision’ appears.

Either no disc was inserted or the disc that was inserted cannot be used for recordings. Insert a recordable DVD (DVD±R, DVD±RW, or DVD+R Double Layer).

The timer recording overlaps with another timer recording.

If you ignore this warning, the programmed recording with the earlier start time will start first.

Change the information for one of the two recordings.

Delete one of the two recordings

Recordings are not occurring as scheduled. New recordings cannot be made.

The wrong TV channel was decoded (recorded) after you programmed a recording using the ShowView / VIDEO Plus+ system.

The index screen flickers when a DVD±R is inserted.

Picture is fuzzy and brightness varies when played back your recording.

The DVD+RW/-RW cannot be used for recording on this recorder.

The TV channel you want to record is not stored or you selected the wrong programme number. Check the TV channels stored.

You must reset the timer recording after adjusting the clock setting.

You cannot use the recorder to duplicate copyright material (DVDs or videotapes) onto a recordable DVD, “COPY PROTECTED” will be displayed.

‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the exact ‘VPS/PDC time’.

1)Enter the ShowView / VIDEO Plus+ PlusCode programming number of the desired TV channel.

2)Press OK to confirm.

3)Check the channel number in the {Ch.} input field. If this does not correspond to the desired TV channel, select this entry field and change the channel number.

4)Press OK to confirm.

You can finalise the disc using the following function:

1)Press OPEN CLOSE on this recorder to open the disc tray.

2)Insert the disc but do not close the tray.

3)Hold down button number {4} on the remote control until the tray closes. ‘FINALIZING DISC’ appears on the display panel.

4)If finalising has been successful, the Picture Index screen will appear.

This happens if you try to copy DVDs or video tapes that have been copy-protected. Even though the picture on the TV is fine, the recording on the recordable DVD is faulty. This interference is unavoidable with copy-protected DVDs or video tapes.

The recordable DVD has a limited recording lifetime, use a new disc for recording.

You have to re-format the DVD+RW/-RW.

1)Press OPEN CLOSE on this recorder to open the disc tray.

2)Insert the disc but do not close the tray.

3)Hold down button number {0} on the remote control until the disc tray closes.

4)Start recording on the DVD+RW/-RW before you remove it from the disc tray.

94

94

Page 94
Image 94
Philips DVDR3360H user manual Problem Recording Solution English, Message ‘Collision’ appears