| Troubleshooting (continued) |
|
|
Problem (Playback) | Solution |
Disc will not play. | – Insert the disc with the label facing up. |
| – The child lock is on. Read chapter “System Menu Options - |
| Access settings - Child lock” for details. |
| – Wrong region code. The DVD must be coded for ALL regions |
| or Region 2 in order to play on this recorder. |
| – There is no recording on the disc or wrong disc type. Read |
| chapter “Playback from Disc - Playable discs” for details. |
| – Make sure the disc is not scratched or warped. Clean the disc |
| or use a new one. |
| – Check if the disc is defective by trying another disc. |
The picture is distorted or | – The disc does not match with the TV colour system standard |
black and white during | (PAL/NTSC). |
playback. | – The disc is dirty. Clean the disc. |
| – Sometimes a small amount of picture distortion may appear. |
| This is not a malfunction. |
English
There is picture or sound interference with the TV reception.
Distorted sound coming from a connected
–Have your aerial or cable TV signal checked.
–
–Do not connect any cables from this recorder to the ‘Phono’ input of your amplifier.
–If you are playing a DTS CD, you must use the COAXIAL or
The recorded DVD cannot | – If a recording is too short, it is possible that a DVD player | |
be played back on another | cannot detect it. Observe the following ‘minimum recording | |
DVD player. | times’. Recording mode : {HQ} – 5 minutes, {SP}– 10 minutes, | |
| {SPP} – 13 minutes, {LP} – 15 minutes, {EP} – 20 minutes, {SLP} | |
| – 30 minutes, {SEP} - 30 minutes. | |
| – Some DVD players cannot play back DVD±RW recordings. | |
| You can solve this problem by using a special function : | |
| 1) | Press OPEN/CLOSE on this recorder to open the disc tray. |
| 2) | Insert the disc but do not close the tray. |
| 3) | Hold down the number button {2} on the remote control |
|
| until the tray closes. The disc is modified. |
| 4) | If this fails to produce the desired result, repeat the |
|
| procedure using the number button {3} on the remote |
|
| control. |
| 5) | You can restore the disc to its original condition by pressing |
|
| and holding number button {1}. |
Warning! There is a risk that you can no longer play the disc on other DVD players after the following procedure. Therefore, apply this function with particular care.
93 | 93 |
