5 Press 4 or 3 as often as necessary to select Audio setup. Next, press 2 to confirm.
6 Press 4 to select Speaker balance. Next, press 2 to confirm.
➜ Test tone is highlighted.
Audio setup Speaker balance
Press 1 as often as necessary to select A.
Press SYSTEM MENU.
Press and hold DVD/MON for 1 second.
1
2
3
4 Press 4 or 3 as often as necessary to select y Installation. Next, press 2 to confirm.
Volume balance between the speakers
If a speaker appears too loud or too quiet in comparison to the rest of the speakers, you can adjust the volume balance between the speakers.

English

Volume and soundAdjusting the volume of all speakers

●Press VOL+ or VOL– or turn VOLUME on the DVD recorder system to adjust the volume.

➜ VOLUME and the actual volume level are displayed.

0To switch off the sound on the DVD recorder system, press MUTE.

➜ MUTE is displayed.

0To switch the sound on again, press MUTE again.

0To switch off the sound on your Philips TV, press MUTE while you press and hold SHIFT.

Adjusting the volume of the rear speakers and of the subwoofer

●While you press and hold SHIFT:

Adjust the subwoofer volume with 2 / SUB+ and 5 / SUB–. Adust the rear volume with 8 / REAR+ and 0 / REAR–.

Adjusting bass and treble

●While you press and hold SHIFT:

Adjust the bass with 1/ BASS+ and 4 / BASS–. Adjust the treble with 3 / TREBLE+ and 6 / TREBLE–.

Loudness

Loudness enhances bass and treble at low volume.

●While you press and hold SHIFT: Press 7 / LOUDNESS repeatedly to switch loudness on or off.

➜LOUDNESS ON or OFF is displayed on the DVD recorder system.

Test tone

<

On

>

Front left

< +1

>

Front right

< +1

>

Center

<

0

>

Rear left

<

0

>

Rear right

<

0

>

Subwoofer

<

0

>

To exit press

SYSTEM MENU

7Press 2 as often as necessary to select Yes.

➜ The test tone is played on each speaker for a short time.

Note:The test tone is not available for adjusting the subwoofer volume.

8Press 4 or 3 as often as necessary to select the speaker which appears too quiet or too loud: Front left, Front right, Center, Rear left, or Rear right.

9Press 1 or 2 repeatedly to adjust the volume of the selected speaker (values between -6and +6).

10Press OK to store the setting or SYSTEM MENU to exit without storing.

0To adjust the volume of another speaker, repeat steps 8–10.

11Press SYSTEM MENU to end.

Note: If you did not connect the centre or the rear speakers, please change the speaker settings in chapter “Speaker setup” on page 55 accordingly.

20