Timer recording

English

Checking, changing or deleting a timer recording

1Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00.

2Press and hold DVD/MON for 1 second.

3Press TIMER.

4Press 4 or 3 as often as necessary to select the line Timer List.

5Press 2 to confirm the selection.

6Press 4 or 3 as often as necessary to select the timer recording to be checked, changed or deleted.

7If you want to check or change the timer recording: Press 2 again.

Use 1 or 2 to select the input field to be checked or changed.

Use 4, 3 or the numerical buttons to change the desired data.

Press OK to store the changed data.

If you want to delete the timer recording:

Press CLEAR.

➜Clear timer is displayed.

Press OK to start deleting.

➜Timer Cleared is displayed briefly, the programmed recording data disappear and are replaced by -----.

8Press TIMER to end.

Automatic recording from a satellite receiver

This feature can be used only if you own a satellite receiver that can control other equipment via a scart cable and a programming feature (timer). For more information, please see the user manual of the satellite receiver.

1Make sure your satellite receiver is connected to EXT-2 AUX I/O with an RGB capable Scart cable, i. e. a Scart cable with all “pins” wired.

2Press and hold DVD/MON for 1 second.

3Press SYSTEM MENU.

4Press 1 as often as necessary to select A.

5Press 4 or 3 as often as necessary to select z Record settings. Next, press 2 to enter the menu.

6Press 4 or 3 as often as necessary to select the line Sat record.

 

 

Record settings

 

 

 

 

 

Record mode

M2

 

 

 

Direct Record

On

 

 

 

Sat record

EXT2

 

 

 

 

Auto chapters

On

 

 

 

Filter mode

Stndrd

 

 

 

 

To exit press

 

 

 

 

SYSTEM MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

7Use 1 or 2 to select EXT2.

0To switch off automatic recording from a satellite receiver use 1 or 2 to select Off.

8Press OK to confirm the selection.

9Press SYSTEM MENU to end.

10Load a disc on which you want to record in the tray.

11On a DVD+RW press 3 or 4 repeatedly to select an empty title that has enough time for the recording.To prevent overwriting of previous recordings, select the empty title after the last recording.

On a DVD+R this not necessary because previous recordings cannot be overwritten.

12Programme the satellite receiver for recording (programme number of the TV channel, start time, end time). If necessary, see the instruction manual of the satellite receiver.

13Press 2 to switch off the DVD recorder system.

➜SAT is displayed on the DVD recorder system. The DVD recorder system is now ready to record.The satellite receiver connected to EXT-2 AUX I/O will control the beginning and end of the recording.

The satellite receiver will control the recording only if the DVD recorder system is switched to standby.

36