Initial installation
Initial installation

During the initial installation, you will perform some basic settings of the DVD recorder system. You can change all settings of the initial installation later on. See “System settings” on pages 46 – 55.

Please observe the screen of your TV and the display of the DVD recorder system.

1If you have not done yet, switch on your TV and connect the DVD recorder system to the mains supply as described in chapter “Mains”.

2Press DVD/MON on the remote control or 2 on the set to switch on the DVD recorder system.

➜ IS TV ON? is displayed on the DVD recorder system.

3If necessary set the TV to the correct audio/video channel for the DVD recorder system. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00.

4➜ The menu Menu language appears on the TV screen.

Menu language

English

Español

Français

Italiano

Deutsch

Press OK to continue

5 ➜ The menu Audio language appears.

Press 3 or 4 to select the language in which a DVD should preferably be played, if the language is available on the disc. Next, press OK.

6 ➜ The menu Subtitle Language appears.

Press 3 or 4 to select the language in which subtitles should preferably be displayed, if subtitles in the language are available on the disc. Next, press OK.

Note: Some DVDs may override your audio and subtitle language selection. In this case, you have to select the audio and subtitle language in the DVDs Disc Menu.

7 ➜ The menu TV Shape appears.

Press 3 or 4 to select the screen format.This setting will have an effect only with DVDs supporting different screen formats.

➜4:3 letterbox: for a wide-screen picture (cinema format) on a conventional 4:3 TV set with black borders at the top and bottom of the screen.

➜4:3 panscan: for a full-height picture with cropped edges.

➜16:9: for a wide-screen TV set.

Next, press OK.

8 ➜ The menu Country appears.

Press 3 or 4 to select the country where the

DVD recorder system is used. If your country does not appear, select Other. Next, press OK.

9 ➜ If you have connected the aerial - press OK appears.

If you connected the DVD recorder system to a TV antenna or a cable TV system, press OK.

If not, connect the antenna as described in “Connecting the TV antenna”, then press OK.

➜Searching for TV channels appears and the automatic search for TV channels starts.This may take several minutes. As soon as the search is complete, Autom. search complete appears.

English

(Continues on next page)

Press 3 or 4 to select the language in which the display messages should appear on the TV screen. Next, press OK.

17