Timer recording

Timer recording allows you to automatically start and stop a recording at a later date.The DVD recorder system switches to the right programme number and starts recording at the time entered.

You can pre-programme up to 6 recordings within a period of one month.

Following information has to be keyed in to make a timer recording:

the date of the recordingthe programme number of the TV channelthe start and stop time of the recordingVPS/PDC on or offthe recording mode

This information is saved in a timer entry.

A timer recording will only start if you have switched the DVD recorder system to standby or if you have selected TUNER, CD, CDR or TAPE.

If you have selected DVD, MON,TV, SAT,VCR, GAME, CAM1 or CAM2: Briefly before the beginning of the timer recording, a message will be displayed on the DVD recorder system reminding you to switch the set to standby.

VPS and PDC

With Video Programming System and Programme

Delivery Control the TV station controls the start and the duration of recordings.The DVD recorder system switches itself on and off at the right time even if a TV programme starts earlier or ends later than scheduled.

Usually the start time is the same as the VPS/PDC time. However, if your TV magazine indicates a time that differs from the programme’s start time (e.g. programme start

20.15and VPS/PDC 20.14), you have to key in 20.14 as start time.

If you want to key in a time that differs from the VPS/PDC time, you have to switch off VPS/PDC.

Only one TV programme on a TV channel at a time can be controlled using VPS/PDC. If you like to record two or more TV programmes on a TV channel by using VPS/PDC, you have to programme them separately.

English

33