System settings

Using a decoder to decode a TV channel

Some TV channels are encoded and can be watched without distortions only with a decoder. If you have connected a decoder, please set which TV channel should be decoded with the decoder.

Note: The decoder must be connected to EXT-2 AUX I/O.

1Press DVD/MON as often as necessary to see the TV channel currently selected on the DVD recorder system.

2Press CH+ or CH– or 0–9 repeatedly to select the

TV channel which you want to decode with the decoder.

3Press SYSTEM MENU.

4Press 1 as often as necessary to select A.

5Press 4 or 3 as often as necessary to select y Installation. Next, press 2 to confirm.

6Press 4 as often as necessary to select Manual search. Next, press 2 to confirm.

7Press 4 as often as necessary to select Decoder.

8Press 2 repeatedly to select On.

Installation

Manual search

 

Channel/freq.

CH

Entry/search

48

Programme number

07

TV channel name

PHI

Decoder

On

TV system

PAL-BG

NICAM

On

Fine tuning

0

To exit press

SYSTEM MENU

➜The decoder will be used to decode the selected TV channel.

0To switch the decoder off for the selected TV channel, press 2 to select Off.

9Press OK to confirm.

10Press SYSTEM MENU repeatedly to end.

0If necessary, repeat steps 2–10 for other encoded TV channels.

Setting the time and date

Some TV channels broadcast additional information about the time and date.The DVD recorder system uses this information to set the time and date automatically.

If the time and date are not set correctly, select a different TV channel for setting the time and date or set the time and date manually.

1Press and hold DVD/MON for 1 second.

2Press SYSTEM MENU.

3Press 1 as often as necessary to select A.

4Press 4 or 3 as often as necessary to select y Installation. Next, press 2 to confirm.

5Press 4 as often as necessary to select Time/Date. Next, press 2 to confirm.

Installation

Time/Date

 

Time

13:57

Year

2004

Month

03

Date

25

Clock preset

01

To exit press

SYSTEM MENU

6Press 4 as often as necessary to select Clock preset.

7Press 1 or 2 to select the TV channel which should be used for setting of the time and date automatically.

0Or press 1 as often as necessary to select Off and set the time and date manually:

For this, press 4 or 3 repeatedly to select Time, Year, Month or Date. Press 0–9 or 1 or 2 repeatedly to set the correct value.

8Press OK to store the settings or SYSTEM MENU to exit without saving the changes.

9Press SYSTEM MENU to end.

English

53