Installation Audio video input
SAT VCR
GAME TV TAPE CDR CD
System settings
Input settings
The DVD recorder system allows you to connect a varity of equipment: a satellite receiver or set-top box, a VCR, a CD player etc. Please set to which input sockets you connected the equipment.

English

1Press and hold DVD/MON for 1 second.

2Press SYSTEM MENU.

3Press 1 as often as necessary to select A.

4Press 4 or 3 as often as necessary to select y Installation. Next, press 2 to confirm.

5Press 4 or 3 as often as necessary to select Audio Video Input. Next, press 2 to confirm.

>

>

>

< EXT1 > < LIN2 > < LIN1 > < DIG >

To exit press

SYSTEM MENU

6Press 4 as often as necessary to select SAT,VCR, GAME or TV, CD, CDR,TAPE.

7Perform the following settings for the selected source.

54

Settings for SAT,VCR, GAME

For each of these AV sources you can do two settings:

–AV source: Select the input to be used for recording from the equipment or for playing its sound.

–Additional audio: Select the input which should be used preferably for playing the sound of the equipment. E. g. if you connected the equipment to one of the digital audio inputs to enjoy digital surround sound on the DVD recorder system.

If you did not connect this kind of equipment, select None for both, AV source and Additional audio.

1Press 2 to enter the menu. ➜ AV Source is highlighted.

Installation

VCR

AV Source

EXT2

Additional Audio

<None>

To exit press

SYSTEM MENU

2Press 2 as often as necessary to select

–EXT1 or EXT2: the AV input to which you connected the equipment.The DVD recorder system will use this input for recording from the equipment.

–None: if you did not connect this kind of equipment or if you connected it to one of the audio inputs only. In this case, recording from the equipment is not possible.

3Press 4 to select Additional Audio.

4Press 2 as often as necessary to select

–DIG or OPT: if you connected the digital audio output of the equipment to IN DIGITAL or IN OPTICAL.

You need a digital connection to play digital (surround) sound on the DVD recorder system.

–None: if you did not connect the equipment at all or if you did not connect it to IN DIGITAL or IN OPTICAL.

–LIN1, LIN2 (only available if you selected None for AV Source above): if you connected the audio output of the equipment to LIN1 or LIN2 without a video connection to the DVD recorder system.

5Press OK to store the settings or SYSTEM MENU to exit without storing.