English
1Make sure the function Direct Record is switched on.
2Make sure a recordable disc is loaded into the tray.
3Press 2 to switch the DVD recorder system to standby.
4On the TV select the TV channel that you wish to record.
5Press REC/OTR to start recording the TV channel you are watching.
➜READING EXT1 is displayed and the DVD recorder system searches the TV channel selected on the TV among its stored TV channels. This search will take some time. Recording will not start immediately after you have pressed REC/OTR.
During this search please do not change theTV channel on the TV.This may affect the tuning of the DVD recorder system.➜As soon as the TV channel is found, recording starts automatically.
Note: If the DVD recorder system was not able to find the TV channel selected on the TV among its stored TV channels, NOTV is displayed. Make sure all TV channels stored on the TV are available on the DVD recorder system. If necessary, store any missing channel. Check if the connectors at both ends of the scart cable are plugged in correctly and firmly. Check your TV’s instruction manual to see which scart socket is used for video signals. If the problem then still persists, this feature is not available.
6Press STOP 9 to stop recording.