Timer recording

English

Programming a recording with the ShowView® system

You do not need to tediously enter the date, the programme number, the start and end time. All information needed for programming is contained in the ShowView® programming number.You can find this number in most of the TV magazines, indicated next to the start time of the TV programme.

1Switch your TV set on. If necessary set the TV to the correct audio/video channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00.

2Press and hold DVD/MON for 1 second.

3Press TIMER.

4Press 4 or 3 as often as necessary to select the line ShowView system.

5Press 2 to confirm the selection.

6Use the numerical buttons to enter the ShowView® programming number.This number is up to 9 digits long, e.g. for 5-312-4 or 5 312 4 enter 53124.

0To clear, in case you made a mistake, press CLEAR.

Timer

ShowView system

 

 

 

 

VPS

Rec

Date

Prog. Start

PDC End

Mode

 

PHI 8:00

9:00

M2

19

Mo-Fr/Weekly

To store

 

Press RETURN

Press OK

 

0If you wish your recording to be repeated, press RETURN as often as necessary to select the desired option:

➜Mo-Fr: for recordings to be repeated daily from Monday to Friday

➜Weekly: for recordings to be repeated weekly (every week on the same day)

7Press OK to confirm.

➜ The timer programme appears.

Notes:

If ShowView number wrong is displayed, the keyed in ShowView® programming number is incorrect. Check time and date on the DVD recorder system. Repeat your entry correctly or end programming by pressing SYSTEM MENU.

If Please enter programme number is displayed, the programme number of the TV channel has not yet been allocated to the ShowView® programming number. Select the appropriate programme number of the TV channel using 1, 2 or the numerical keys on the remote control and confirm by pressing OK.

If daily recording was entered for a wrong day, Weekend programming not possible is displayed. Make sure to enter a day from Monday to Friday.

0To change the timer programme, you can go back at any time. Use 1 or 2 to select the appropriate input field. Use 4 or 3, or the numerical buttons to change the information.

0To switch on VPS/PDC press 2 to select Start. Press RETURN as often as necessary until 8 lights up.

➜ VPS/PDC is switched on.

Note: The ShowView® system does not take the later starting of a TV programme into account.To compensate for a later starting time, switch on VPS/PDC.

0To change the recording mode press 2 to select End. Press RETURN as often as necessary to select the desired recording mode.

8Press OK again to store the entire programming information.

➜ The entire programming information is stored.

0To exit the timer without storing press TIMER repeatedly.

9Press TIMER to end.

10Load a disc on which you want to record in the tray.

11On a DVD+RW select an empty title at the end of the disc. Otherwise previous recordings may be overwritten.

12A timer recording will only start if you have switched

the DVD recorder system to standby or if you have selected TUNER, CD, CDR or TAPE: Press 2 or TUNER, CD, CDR or TAPE.

➜ If any recordings are programmed, TIMER lights up.

0To stop a running timer recording before the scheduled end, press 9 on the DVD recorder system.

34