Philips LX7500R/01, LX7500R/04 w Features, xRemote control settings, Off, Normal, English, Standby, Display, Low power, Status box, Remote control settings

System settings

English		w Features
	1	Press and hold DVD/MON for 1 second.
	2	Press SYSTEM MENU.
	3	Press 1 as often as necessary to select A.
	4	Press 4 or 3 as often as necessary to select w Features.
		Next, press 2 to confirm.

A	B	C	D	E	F G
	2	17	off	off	no off
t					Features
u	Status box			On
	Standby			Normal
w	Display			Bright
x

5Press 4, 3 as often as necessary to select the desired function. Next, press 2 to confirm.

6Press 4, 3 as often as necessary to select the desired setting.You can choose as follows:

Status box

With OSD (On Screen Display) not only screen menus, but also information on the current operating status (counter, playback, recording TV channel…) are displayed on the TV screen.You can switch off the OSD information to avoid recording it when recording from the

DVD recorder system to additional equipment.

➜On:The OSD information appears in every selected mode for a few seconds and disappears again.

➜Off:The OSD information is switched off and is no longer displayed on the TV screen.

Standby

You can switch off the clock display on the DVD recorder system to save power. Programmed recordings will nevertheless be executed.

➜Low power: If the DVD recorder system is switched to standby by pressing 2, the clock display is switched off.

➜Normal: If the DVD recorder system is switched to standby by pressing 2, the clock display is still visible.

➜Demo mode: A list with the most important features scrolls on the display when the DVD recorder system is switched to standby.

Display

Select a level for the display brightness.

Note: You cannot switch off the display completely.

7Press OK to confirm the new setting.

8Press 1 to end.

48

xRemote control settings

You can set the remote control type to which your DVD recorder system should respond to: DVD player, DVD recorder.

1Press and hold DVD/MON for 1 second.

2Press SYSTEM MENU.

3Press 1 as often as necessary to select A.

4Press 4 or 3 as often as necessary to select x Remote control settings. Next, press 2 to confirm.

A B C D E F G

2	17	off	off	no	off
t			Remote control settings
Remote control used			DVD player

u

w

x

5Press 4, 3 as often as necessary to select the remote control type to which your DVD recorder system should respond to:

➜DVD player:The DVD recorder system responds additionally to a DVD player remote control (remote control code RC-6).

Choose this setting if the remote control of your Philips TV set supports DVD functions.

➜DVD recorder:The DVD recorder system responds only to the supplied remote control.

6Press OK to confirm the new setting.

7Press 1 to end.