System settings
Additional TV channel settings | TV channel name |
English
You can change the name of a TV channel. If the reception of a TV channel is poor, you can change the “TV system”, switch off
1Press DVD/MON as often as necessary to see the TV channel currently selected on the DVD recorder system.
2Press CH+ or CH– or
3Press SYSTEM MENU.
4Press 1 as often as necessary to select A.
5Press 4 or 3 as often as necessary to select y Installation. Next, press 2 to confirm.
6Press 4 as often as necessary to select Manual search. Next, press 2 to confirm.
Installation
Manual search |
|
|
|
Channel/freq. | CH |
Entry/search | 48 |
Programme number | 07 |
TV channel name | PHI |
Decoder | On |
TV system | |
NICAM | On |
Fine tuning | 0 |
To exit press
SYSTEM MENU
7Press 4 repeatedly to select either
➜TV channel name: to set the TV channel name,
➜Decoder: to decode an encoded TV channel. See “Using a decoder to decode a TV channel”,
➜TV system: to change the TV system of the TV channel,
➜NICAM: to switch NICAM on/off,
➜Fine tuning: to change the tuning of the TV channel slightly.
1Press 2 repeatedly to select a character of the TV channel name.
2Press 3 or 4 repeatedly to set/change the desired character.
3Repeat steps 1 and 2 for all characters of the channel name.
Note: Channel names are limited to 5 characters.
4Press OK to store the TV channel name.
5Press SYSTEM MENU to end.
TV system
If the TV system of the TV channel and that of your TV are not the same, the sound and/or the picture may be distorted or missing. Usually the TV system is detected automatically.
1Press 2 repeatedly to select the TV system
Note: If you change TV system to a setting not supported by your TV set, the picture and/or sound may be missing.
2Press OK to store the setting.
3Press SYSTEM MENU to end.
NICAM
1Press 2 repeatedly to switch NICAM on or off:
➜On: Stereo and
➜Off:To improve the sound quality of a weak TV channel, only mono sound is supported.
2Press OK to store the setting.
3Press SYSTEM MENU to end.
Fine tuning
1If the reception of the TV channel is distorted, press 3 or 4 repeatedly to change the tuning of the TV channel slightly.
2Press OK to store the setting.
3Press SYSTEM MENU to end.
52