Initial installation

English

10 ➜ Time, Year, Month and Date appear.

If the settings are correct continue with step 13, else press 4 repeatedly to select either Time, Year, Month or Date.

11Press 1 or 2 or 0–9 repeatedly to set the correct value.

12If necessary, repeat steps 10 and 11 until all settings of the time and date are correct.

13Press OK.

➜The screen turns blank for about half a minute. Next, the DVD screen appears.The installation is complete and the DVD recorder system is ready for use.

14To install radio stations on the DVD recorder system: Make sure an FM antenna is connected to the DVD recorder system. Next, press TUNER.

➜AUTO INST is displayed.The DVD recorder system searches for available radio stations and stores them in its memory.

➜After the search INSTALLATION COMPLETE is scrolled and a radio station is played.

15If you connected other equipment to the DVD recorder system, the following standard settings will be used:

equipment

is connected to

TV

EXT-1 TO TV-I/O

satellite receiver

EXT-2 AUX I/O

VCR

EXT-2 AUX I/O

game console

EXT-2 AUX I/O

CD player

IN DIGITAL

CD recorder

LIN1

tape deck

LIN2

If you connected the equipment to other input sockets, please continue with chapter “Input settings” on page 54 to change the settings and to ensure proper functionality.

16The DVD recorder system uses the following standard settings for the distance between the speakers and your preferred listening position. For optimal surround sound experience you can change these settings. See “Speaker setup” on page 55.

3 m

3 m

3 m

1.5 m 1.5 m

18