6 Listen to radio

Tune to a radio station

1 Press TUNER repeatedly to select FM or MW.

2 Press and hold / for more than 2 seconds.

»[SEARCH] is displayed.

»The radio tunes to a station with strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a weak station, press / repeatedly until you find optimal reception.

Program radio stations automatically

Note

You can program a maximum of 40 preset radio stations.

1In the tuner mode, press and hold PROG/ANGLE for more than 2 seconds to activate automatic program mode.

»[AUTO] is displayed.

»All available stations are programmed in the order of waveband reception strength.

»The first programmed radio station is broadcast automatically.

Program radio stations manually

Note

You can program a maximum of 40 preset radio stations.

1 Tune to a radio station.

2 Press PROG/ANGLE to activate program mode.

»[PROG] blinks on the display.

3 Press / to allocate a number (1 to 40) to this radio station, then press PROG/ ANGLE to confirm.

»The preset number and the frequency of the preset station are displayed.

4 Repeat the steps above to program other stations.

Note

To overwrite a programmed station, store another station in its place.

Select a preset radio station

1 Press / to select a preset number.

Tip

Position the antenna as far as possible from TV, VCR or other radiation source.

For optimal reception, fully extend and adjust the position of the antenna.

20EN

Page 19
Image 19
Philips MCD170/98 Listen to radio, Tune to a radio station, Program radio stations manually, Select a preset radio station