10 Other features
Set the alarm timer
This unit can be used as an alarm clock.The DISC,TUNER or USB is activated to play at a preset time.
1 Ensure that you have set the clock correctly.
2 In standby mode, press and hold TIMER.
3 Press DISC, TUNER or USB to select a source.
4 Press TIMER to confirm.
»The hour digits are displayed and begin to blink.
5 Press 
/
to set the hour. 6 Press TIMER to confirm.
»The minute digits are displayed and begin to blink.
7 Press 
/ 
to set the minute. 8 Press TIMER to confirm.
»The timer is set and activated.
Activate and deactivate alarm timer
1 Press TIMER repeatedly to activate or deactivate timer.
»If timer is activated, the display shows
.
»If timer is deactivated, 
disappears on the display.
Note
•Alarm timer is not available in MP3 LINK mode.
•If DISC/USB source is selected and the track cannot be played, tuner is activated automatically.
Set the sleep timer
This DVD Micro Theater can switch to standby automatically after a set period of time.
1 When the DVD Micro Theater is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
»When sleep timer is activated, the display shows
.
To deactivate sleep timer
1 Press SLEEP repeatedly until “[OFF]” is displayed.
»When sleep timer is deactivated,
disappears on the display.
Listen to an audio device
You can listen to an audio device through this DVD Micro Theater.
1 Connect a 3.5mm audio cable (not supplied) from the MP3 LINK socket to the audio output socket audio device.
2 Press MP3 Link.
3 Start to play the device (see the device user manual).
28EN
