Philips MCD170/98 Troubleshooting, Remote control does not work, Replace or clean the disc

Models: MCD170/98

1 33
Download 33 pages 27.96 Kb
Page 30
Image 30

12 Troubleshooting

Caution

Never remove the casing of this DVD Micro Theater.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this DVD Micro Theater, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.Philips.com/support). When you contact Philips, ensure that your DVD Micro Theater is nearby and the model number and serial number are available.

No power

Ensure that the AC power plug of the DVD Micro Theater is connected properly.

Ensure that there is power at the AC outlet.

As a power-saving feature, the DVD Micro Theater switches to standby automatically 15 minutes after disc/USB play reaches the end and no control is operated.

No sound or poor sound

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connected correctly.

Check if the stripped speaker wires are clamped.

Left and right sound outputs reversed

Check the speaker connections and location.

No response from the DVD Micro Theater

Disconnect and reconnect the AC power plug, then turn on the system again.

Remote control does not work

Before pressing any function button, first select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the DVD Micro Theater.

Insert the battery with its polarities (+/– signs) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the DVD Micro Theater.

No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

Use a finalized CD or correct format disc.

The DVD player does not respond when buttons are pressed.

Disconnect the power plug from the jack, and insert again.

No image is output when a function is selected.

Make sure the component is connected correctly.

Press the correct function button for the input source.

Recording or playback cannot be made

Clean deck parts.

Use only NORMAL tape.

Apply a piece of adhesive tape over the missing tab space.

The language for the sound or subtitle cannot be changed during DVD playback.

Multi-language sound or subtitle is not recorded on the DVD.

Changing the language for the sound or subtitle is prohibited on the DVD.

E n g l i s h

EN 31

Page 30
Image 30
Philips MCD170/98 user manual Troubleshooting, Remote control does not work, Replace or clean the disc