Connecting the Telephone Cable
Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and therefore it can- not be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for analogue terminals.
Connect the telephone cable to the device by inserting it in the socket designated with LINE
If you connect your device as extension to a tele- phone system, you must set it for working as an ex- tension (also see Chapter "Telephone connections and additional devices, page 26).
Connecting the Power Cable
Check whether the mains voltage of your device (in- dicated on the type label) matches the mains voltage available at the setup location.
Insert the mains cable into the connection located on the rear side of the device. Connect the mains cable to the elec- trical socket.
Selecting the Country
Always set the country in which you are operating the machine. Otherwise, your machine is not adapt- ed to the telephone network. If your country is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.
1Use [ to select the country in which you are operat- ing the machine.
2Confirm with OK.
After this input, the machine prints another help page and checks the telephone line.
Entering Your Number
Your name and number are added together with date, time and page number at the top edge of each fax transmission (= header).
1Enter your number. Using # or * you can enter a plus sign.
2Confirm with OK.
Entering Your Name
1Enter your name. You can enter characters using the numeric keys (see button labels). Enter special charac- ters using 0. Press the respective button several times until the desired character or special character appears on the display.
You can move the cursor using [. Use C to de- lete individual characters.
2Confirm with OK.
After the input, the machine prints an overview of the functions.
Entering the Time and Date
1Enter the time, e.g. 1400 for 2 pm.
2 Enter the date (two digits each) e.g.
080607 for 8 June 2007.
3Confirm with OK.
You can restart the initial installation process any time. Press i and 2.
EN
Initial Installation
After you connect your device to the mains voltage, the in- itial installation commences. Press i. Your device prints a help page.
Selecting the Language
1Use [ to select the desired display language.
2Confirm with OK.
Initial Operation | 9 |
