Connecting the Telephone Cable

Connect the telephone cable to the device by inserting it in the socket designated with FAX/Ñ(RJ-11-Connec-

tor). Insert the telephone plug into your PTT line socket.

CAUTION!

Connection to an ISDN system!

You can not connect your devices directly to the digital output of the ISDN system. Details for ISDN connections can be found in the instructions provided with the terminal adapter or the dial-up router.

Notice

Connection to Private AutomaticBranch Exchange

If you connect your device as extension to a telephone system, you must set it for working as an extension (also see Chapter Telephone Lines and Additional Devices, page 64).

Connecting the Mains Cable

CAUTION!

Mains Voltage at the Site of Installation!

Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.

1Insert the mains cable into the connection located on the rear side of the device. Plug the power cable into the electrical outlet.

2Switch the device on using the on/off switch on the rear.

EN

Initial Installation

After you connect your device to the mains voltage, the device starts. During the booting process, the lights flash. Wait until the initial installation process begins.

Selecting the Language

1Use [ to select the desired display language.

2Confirm with OK.

Selecting the Country

CAUTION!

Setting the Country Correctly!

You must set the country in which you are operating the device. Otherwise your device is not adapted to the telephone network. If your country is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.

1Use [to select the country in which you are oper- ating the device.

2Confirm with OK.

Set the Time Zone(Function is not supported in all countries and networks)

In countries with several time zones, you can select from preset time zones or manually enter the deviance of your time zone from UTC (see also chapter on setting the time zone, page 57). In countries with one time zone, the setting is adjusted automatically if you set the country correctly.

1Use [ to select the time zone in which you are operating the device.

2Confirm with OK.

Notice

Automatic Changeover Between Summer Time/Winter Time

With setting the country and time zone, the automatic changeover between summer and winter time is switched on. The automatic changeover is switched off if you enter the deviance from UTC manually using the time zones editor

Initial Operation · Connecting the Telephone Cable

15