5At the conclusion of the install process you must restart your computer. Make your selection as to whether the computer should restart automatically or whether you would like to restart the computer yourself at a later time.

EN 6 Only after the restart, connect the device to your PC with a typical USB cable. The USB port of your device can be found on the rear side.

Notice

Only high-speed certified USB cable

Use only a custom high speed certified USB cable to connect the device to your computer. The cable should be no longer than 1.5 metres.

7Your device is detected as a new peripheral device and registered.

8If your operating system is Windows XP (Service Pack 2), an additional window will appear during the final installation. Select No, not this time, and click on Next.

9Under Windows XP, select Install software auto- matically during the final installation and click on Next.

18

Philips · LaserMFD 6170dw