EN
10 Fax
Send a Fax Using Standard Settings
Your fax message will be sent using the standard set- tings. If you would like to adjust the settings yourself (for example resolution or contrast) for a fax transmission use function Send Fax Later,page 44).
1Insert the document.
2 Press FAX.
Notice
Call Up Function ImmediatelyYou can also call the function by pressing C, 41 and OK.
3Enter the desired number using the numeric keypad or select a saved entry.
4Press FAX or o.
Notice
Automatic RedialIf the subscriber is busy, the device dials the number again after some time. Press j, in order to cancel the transmission process. After the transmission, the device prints out a transmission report depending on the set- tings.
Specifications for Documents
Width of Documents | |
|
|
Length of Documents | |
|
|
Paper Weight of the | |
Documents |
|
|
|
Capacity | 50 page (80¦g/m2) |
|
|
Manufacturer’s Rec- | A4 · A5 · Letter · Legal |
ommendation for Op- | (80¦g/m2 |
timum Operation |
|
|
|
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction fluid, are soiled or have a coated surface.
…that are written on with a soft pencil, with paint, chalk or charcoal.
…originate from newspapers or magazines (printing ink).
…that are held together with office or note- book staples or with tape or glue.
…are pasted with note papers.
…are creased, crumpled or torn.
Loading Documents
The device is equipped with an automatic document feeder. Up to 50 Documents can be feed automatically into the machine to be scanned, faxed or copied. You can scan single documents or smaller templates using the flatbed scanner.
Insert Documents into the Automatic Document Feeder
1Insert the documents face up into the document feeder. The lower most document will be fed in first. You can insert up to 50 documents (80¦g/m2) at a time.
2Push the document guide inwards, so that it lies level on the documents.
42 | Philips · LaserMFD 6170dw |