4Select an encryption standard or switch off network security using [

CAUTION!

Unprotected Wireless Networks are Accessible to Others!

Unprotected Wireless Networks are Accessible to Others! Always protect your network against unauthorised access. You can toggle between different encryption standards.

5Confirm with OK.

6Enter the password for the network.

Notice

WEP Key

With 64-bit encryption, the WEP key must be either 5 characters (ASCII) or 10 numbers (hexadecimal). With 128-bit encryp- tion, the WEP key must be either 13 characters (ASCII) or 26 numbers (hexadeci- mal). You can find the WEP key in the network settings of your PC.

Notice

WPA Key

Enter an 8 to 63 character long password. The password can contain alphanumerical characters—numbers and letters—and any other symbol available on the keypad. The only invalid character is "€” (the euro currency symbol).

7Confirm with OK.

With the connection mode, you set the IP address and subnet mask. If you have a DHCP or BOOTP server in your network which dynamically assign IP addresses, you can assign the settings automatically.

8Select automatic or manual configuration using [.

9Confirm with OK.

Notice

This Process May Take a Few Moments

The automatic configuration of IP address and subnet mask on the connected network PCs may take a moment.

10 Manual Configuration: Enter the IP address (for example 192.168.001.×××).

Notice

IP-Address

The first three blocks of numbers refer to the IP field; this information must match the IP address on your computer. The last three digits determine are the individual IP address of the device. You can enter any number between 000 and 255. However, this number must be unique within the net- work; it may not be used on any other PC or network component.

11 Confirm with OK.

12 Manual Configuration: Enter the subnet mask

(for example 255.255.255.000).

 

Notice

EN

Subnet Mask

 

In a network with a gateway or router, the subnet mask indicates whether the respective data packets are addressed to an internal recipient in the network or whether they should be sent to a recipient outside of the network.

13 Confirm with OK.

Modifying Wireless Network

Settings

Entering the Network Name (SSID)

You can find the network name (Service Set ID) in the network settings of your computer. The SSID must match the SSID on the computer or on the access point (Access Point, Router).

1Press C, 0821 and OK.

2Entering the SSID.

3Confirm with OK.

Setting Network Security

CAUTION!

Unprotected Wireless Networks are

Accessible to Others!

Unprotected Wireless Networks are Accessible to Others! Always protect your network against unauthorised access. You can toggle between different encryption standards.

1Press C, 0822 and OK.

2Select an encryption standard or switch off network security using [

3Confirm with OK.

4Enter the password for the network.

Notice

WEP Key

With 64-bit encryption, the WEP key must be either 5 characters (ASCII) or 10 numbers (hexadecimal). With 128-bit encryp- tion, the WEP key must be either 13 characters (ASCII) or 26 numbers (hexadeci- mal). You can find the WEP key in the network settings of your PC.

Networks · Setting Up a Wireless Network (WLAN) Manually

53