Selecting the Country
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your device is not adapted to the telephone network. If your country is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.
1Press C, 031 and OK.
2Use [to select the country in which you are oper- ating the device.
3Confirm with OK.
Selecting the Language
1Press C, 033 and OK.
2Use [ to select the desired display language.
3Confirm with OK.
Setting the Date and Time
Entering the Date and Time
1Press C, 011 and OK.
2Enter the date (two digits for each field), for example 31¦05¦25 for May 31th, 2025.
3Enter the time, e.g. 14 00 for 2 pm.
4Confirm with OK.
Set the Time Zone
Coordinated Universal Time (UTC) is the current standardised universal time format used. Starting from Greenwich in London (Zero Meridian), the world is split into time zones. These time zones are indicated with a deviance from UTC (in hours) for instance UTC+1 for Central European Time (CET)
In countries with several time zones, you can select from preset time zones or enter the deviance of your time zone from UTC. In countries with one time zone, the setting is automatically adjusted if you set country correctly (see also chapter Selecting the Country, page 57).
1Press C, 012 and OK.
2Use [ to select the time zone in which you are operating the device.
3Enter the Deviance from UTC Manually: Enter
the deviance (in hours) using the numeric keypad, for example, 1 for UTC+1, The display shows the time zone editor.
Notice
Time Zone Editor |
| |
Press [to change the sign |
| |
also enter values under an hour, example, | EN | |
0.15 (or 0.25) for a quarter of an hour, | ||
|
0.30(or 0.50) for half an hour or 0.45 (or 0.75) for three quarters of an hour.
4Confirm with OK.
Notice
Automatic Changeover Between Summer Time/Winter Time
With setting the country and time zone, the automatic changeover between summer and winter time is switched on. The automatic changeover is switched off if you enter the deviance from UTC manually using the time zones editor
Set the Time Synchronization with SNTP ServerWith the simple time network protocol (SNTP), you can synchronize the date and time of your device with a server in the network automatically.
Activating the Server Access
1Press C, 0103 and OK.
2Use [to select whether you would like to turn the function on or off.
3Confirm with OK.
Enter the SNTP Server Address
1Press C, 0101 and OK.
2Enter the name of the SNTP server.
Notice
Enter the Server Address
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
3Confirm with OK.
Enter the SNTP Server Port
1Press C, 0102 and OK.
2Enter the server port number (default setting: 123).
3Confirm with OK.
Settings · Selecting the Country | 57 |