Updating Firmware

Notice

Calling the Web Interface

You can also edit the device firmware with the device's web interface (see also the chapter Web Interface, page 19).

The firmware defines the basic functions and capabilities of your device. Sometimes also referred to as the device driver. We constantly strive to implement improvements and innovations. Check our homepage www.sagemcom.com for information on the current firmware version available for your device.

CAUTION!

Do not interrupt power supply

Do not switch the device off during the print process and do not unplug the device from the power supply. If the Firmware update is not carried out error-free, your device will probably no longer function properly.

Wait until the firmware update is completed before performing more operations on your device.

CAUTION!

Settings will be Deleted

Depending on the firmware version of your device, all modified settings are deleted during a firmware update and reset to factory set- tings. If the settings are deleted, you will need to calibrate the scanner again (see also the chapter Calibrate Scanner, page 75).

1Load the firmware from the specified internet page and save the file directly in the root directory of the USB storage medium (= highest directory level). The file shall not be saved in a folder.

CAUTION!

Use Only Original Firmware

When carrying out a Firmware update only use the Firmware file for your device from the website: www.sagemcom.com. Using other Firmware files can lead to your device not functioning properly. Sagem- com accepts no liability for device malfunctions which can be traced back to the use of third party Firmware.

2Connect the USB storage medium with the firmware file to the USB host connection port.

EN

3If the device detects the firmware file, a message appears on the display. Press o to update firmware.

4This process can take a few minutes. The devices re- boots twice. On completion of the procedure, the device starts the initial installation process (see also section Initial installation, Page 15).

CAUTION!

Removing USB Storage Media!

Never pull out the storage medium while the device is accessing it. If the Firmware update is not carried out error-free, your device will probably no longer function properly.

Changing the Toner

Cartridge

Your device registers the extent of toner used for every print-out and calculates the toner level of the toner cartridge on that basis. The toner level is stored in each toner cartridge. You can use different toner cartridges as well as display the respective toner level of the toner cartridge.

DANGER!

Escaping Toner Dust!

Never open a toner cartridge. If toner dust is released into the air, you should avoid allowing it to contact your skin and eyes. Do not inhale the released toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set. Never remove loose toner dust with a vacuum cleaner.

CAUTION!

Use Original Consumable Materials!

Use only original consumable materials. These are available from a specialised retailer or through our order service. Other consumable materials can cause damage to the device.

Service · Updating Firmware

69