8Push the paper tray into the device all the way to the stopping point.

EN

Load Paper into the Manual Paper Feed

1Press C, 202 and OK.

2Select the manual paper feed using [.

3Confirm with OK.

4Load the paper into the manual paper feed on the front of the device.

5Enclose the paper with the two side paper guides. Be sure not to enclose it so tightly that it bends.

Loading Envelopes

You can print on envelopes directly using the manual paper feed.

CAUTION!

Unsuitable Envelopes!

Do not use envelopes with self-adhesive flaps, window envelopes or envelopes with metal fasteners.

1Load the envelope into the manual paper feed on the front of the device. The short edge must face the direction of the device. The side which is to be printed should lay face up. The envelope flap must be face down on the left hand side.

2Enclose the envelope with the two side paper guides. Ensure that the envelope is not inserted so tightly that it bends.

CAUTION!

Reset Settings

Reset the standard setting again after the print job so that the paper feed from the paper tray is guaranteed for incoming fax transmissions.

Inserting Slides and Labels

Use slides which are designed for copiers and laser printers as they must stand up to high temperatures and printing. The printing side is usually somewhat rougher than the reverse side.

You can insert slides and sheets of labels into the paper tray and into the manual paper feed. It is preferable to use the manual paper feed for printing on this print media (see also chapter onLoad Paper into the Manual Paper Feed, page 28).

CAUTION!

Unsuitable Slides and Labels!

Do not use slides which are designed for manual inscription or for an overhead projector. These slides can melt in the device and damage it.

Use sheets of labels for use in laser printers. The labels must cover the entire sheet otherwise they could peel off in the device.

28

Philips · LaserMFD 6170dw