Introduction of audio

adjustments

1
2
2
3
3
4
4
5
5
1Audiodisplay
Showsthe audio adjustment status.
2SWindicator
Showswhen the subwoofer output is turned
on.
3Bassbooster indicator
Showswhen the bass boost is in effect.
4Loudnessindicator
Appearsin the display when loudness is
turnedon.
5FIEindicator
Showswhen the front image enhancer is
turnedon.
%PressAUDIO to display the audio func-
tionnames.
PressAUDIO repeatedly to switch between
thefollowing audio functions:
FAD(balance adjustment)—EQ (equalizer
curveadjustment)—LOUD (loudness) —
SUB.W(subwoofer on/off setting)—80: 0 (sub-
woofersetting)—HPF (high pass filter)—BASS
(bassboost)—FIE (front image enhancer)—
SLA(source level adjustment)
#Whenthe subwoofer controller setting is
P/O:FUL, you cannot switch to SUB.W. (Refer to
page34.)
#Youcan select the 80: 0 only when subwoofer
outputis turned on in SUB.W.
#Whenthe F.I.E. function is on,you cannot se-
lectHPF.
#Whenthe rear output setting is R-SP :S/W,
youcannot select FIE.
#Whenselecting the FM tuner as the source,
youcannot switch to SLA.
#Toreturn to the display of each source, press
BAND.
#Ifyou do not operate the audio function within
about30 seconds, the display is automatically re-
turnedto the source display.

Using balance adjustment

Youcan change the fader/balance setting so
thatit can provide you an ideal listening envir-
onmentin all occupied seats.
1 PressAUDIO to select FAD.
#Ifthe balance setting has been previously ad-
justed,BAL will be displayed.
2 Pressaor bto adjust front/rear speak-
erbalance.
FAD:F15 to FAD :R15 is displayedas the
front/rearspeaker balance moves from front to
rear.
#FAD: 0 isthe proper setting when only two
speakersare used.
#Whenthe rear output setting is R-SP :S/W,
youcannot adjust front/rear speaker balance.
Referto Setting the rear output and subwoofer out-
puton page 34.
3 Presscor dto adjust left/right speaker
balance.
BAL: L15 toBAL : R15is displayed as the left/
rightspeaker balance moves from left to
right.
Audio Adjustments
En 29
English
Section
09