Pioneer DEH-P3900MP Boosting the bass, Front image enhancer (F.I.E.), Adjusting source levels

2 Pressato turn high pass filter on.
HPF: 80 appearsin the display. High pass fil-
teris now on.
#Ifthe high pass filter has been previously ad-
justed,the frequency of that previously selected
willbe displayed instead of HPF : 80.
#Toturn high pass filter off, press b.
3 Presscor dto select cut-off frequency.
50—63—80—100—125(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are outputted from the front or
rearspeakers.
Boosting the bass
Bassboost function boosts the bass level of
soundlower than 100 Hz. The more the bass
levelis increased, the more the bass sound is
emphasizedand the entire sound becomes
powerful.When using this functionwith the
subwoofer,the sound under the cut-off fre-
quencyis boosted.
1 PressAUDIO to select BASS.
#Youcan also select the bass boost setting by
pressingand holding SW.
2 Pressaor bto select a desired level.
0to+6 is displayed as the level is increased or
decreased.
Front image enhancer (F.I.E.)
TheF.I.E. (Front Image Enhancer) function is a
simplemethod of enhancing front imaging by
cuttingmid- and high-range frequency output
fromthe rear speakers, limiting their output to
low-rangefrequencies. You can select the fre-
quencyyou want to cut.
Precaution
Whenthe F.I.E. function is deactivated, the rear
speakersoutput sound of all frequencies, not just
basssounds. Reduce the volume before disenga-
gingF.I.E. to prevent a sudden increase in vo-
lume.
1 PressAUDIO to select FIE.
#Whenthe rear output setting is R-SP :S/W,
youcannot select FIE.
2 Pressato turn F.I.E. on.
#Toturn F.I.E.off, press b.
3 Presscor dto select a desired fre-
quency.
100—160—250(Hz)
Notes
!Afterturning the F.I.E. function on, use the bal-
anceadjustment (refer to page 29) and adjust
frontand rear speaker volume levels until they
arebalanced.
!Turnthe F.I.E.function off when using a 2-
speakersystem.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
2 PressAUDIO to select SLA.
Audio Adjustments
En
32
Section
09