06Watching TV
Chapter 6
Watching TV
Important
•Before watching broadcast channels, the
Turning the power on
•Press aon the plasma television when the POWER ON and STANDBY indicators are off.
•The system is on.
•The POWER ON indicator lights up blue.
•Press aor 0 to 9 on the remote control unit or STANDBY/ ON on the plasma television if the STANDBY indicator lights up red.
•The POWER ON indicator lights up blue.
•If you press 0 on the remote control unit, images from “INPUT 1” will be displayed.
•If you press 1 to 9, TV images will be displayed.
Placing the system into standby
•Press aon the remote control unit or STANDBY/ON on the plasma television.
•The STANDBY indicator lights up red.
•The system enters the standby mode and the image on the screen disappears.
Note
•When aon the plasma television is off, you cannot turn the power on by pressing aor 0 to 9 on the remote control unit or STANDBY/ON on the plasma television.
•If you are not going to use the plasma television for a long period of time, be sure to remove the power cord from the power outlet.
PDP-508XDA
POWER ON indicator
STANDBY indicator
ON STANDBY
button
PDP-428XDA
POWER ON indicator
STANDBY indicator
ON STANDBY
button
(Viewed from the underside of the display)
Plasma television status indicators
The table below shows the operational status of the plasma television. You can check the current status of the system with the indicators on the plasma television.
Indicator status | System status | |
|
| |
POWER ON | STANDBY |
|
|
|
|
|
| The power cord of the plasma television has been |
|
| disconnected. Or, the power cord of the plasma |
|
| television has been connected but the abutton |
|
| of the plasma television is off. |
|
|
|
|
| Power to the system is on |
|
|
|
|
| The system is in the standby mode |
|
|
|
For other than the above, see Troubleshooting on page 72.
20
En
