Pioneer PDP-508XDA Setting up TV channels automatically, Using Auto Installation, Chapter

Setting up 08

Chapter 8

Setting up

Setting up TV channels automatically Setting up analogue TV channels manually

This section describes how to automatically search for and set up TV channels.

Using Auto Installation

When the plasma television is switched on for the first time after purchase, the initial auto installation is initiated. You can set tuner type and region in successive operations.

Auto Installation

Tuner Type	All
Region	Auto Detection
Installation

Start

1Select “Tuner Type” (/).

2Select the desired tuner type (/).

•You can select from “All”, “Digital” or “Analogue”.

•When you select “All”, set up DTV channels then analogue channels in successive operations. When you select “Digital”, only DTV channels are scanned. Likewise, when you select “Analogue”, only analogue TV channels are scanned.

3Select “Region” (/).

4Select your region (/).

•Select the city or region in which you live. If it is not listed, select “Auto Detection” for automatic setup.

5Select “Start“ (/ then ENTER). Auto Installation automatically starts.

•To quit Auto Installation in progress, press RETURN.

Note

•You can start Auto Installation from the HOME MENU after moving to another city, for example. Perform the following

steps before starting Auto Installation: Press HOME MENU, select “Setup” (/ then ENTER), then “Auto Installation” (/  then ENTER). The password entry screen appears. Enter your four-digit password using buttons 0 to 9. For the password, see Using a password on page 49.

•If no channels are found, check the antenna connections, and then retry Auto Installation.

Use the Manual Adjust function to set up analogue TV channels manually.

1Press HOME MENU.

2Select “Setup“ (/ then ENTER).

3Select “Analogue TV Setup“ (/ then ENTER).

The password entry screen appears. Enter your four-digit password using buttons 0 to 9. For the password, see Using a password on page 49.

4Select “Manual Adjust“ (/ then ENTER).

5Select “Programme Entry“ (/).

6Select a programme number (/). You can select 1 through 99.

Manual Adjust

Programme Entry	1
Search	44.25MHz
System	B/G
Colour System	Auto
Store	Yes
Tuner NR	On
Child Lock	View
High Deviation	Off

7Select “Search“ (/).

8Enter a frequency using buttons 0 to 9, then ENTER. You can also press / to enter a frequency.

9Select “System“ (/).

10Select a sound system (/).

You can select from among “B/G”, “D/K”, “I”, “M/N”.

11Select “Colour System“ (/).

12Select a colour system (/).

You can select from “Auto”, “PAL”, “NTSC”, “SECAM”, “PAL-M”, “PAL-N”, and “4.43NTSC”.

13Select “Store“ (/).

14Select “Yes“ (/).

•With “Yes” selected, you can select the channel using P+/P–. With “No” selected, you cannot select the channel using P+/P–.

15Press HOME MENU to exit the menu.

•Alternatively, to set up for another channel, repeat steps 5 to 14.

27

En