Pioneer PDP-508XDA, PDP-428XDA Preparation Operating range of the remote control unit, 30º 30º

Models: PDP-508XDA PDP-428XDA

1 76
Download 76 pages 7.46 Kb
Page 19
Image 19
Preparation

Preparation

Operating range of the remote control unit

Operate the remote control unit while pointing it toward the remote control sensor located at the bottom right of the front panel of the plasma television. The distance from the remote control sensor must be within 7 m and the angle relative to the sensor must be within 30 degrees in the right, left, upward, or downward direction.

7 m

05

30º Caution

• Do not expose the remote control unit to shock. In addition, do

not expose the remote control unit to liquids, and do not place

in an area with high humidity.

• Do not install or place the remote control unit under direct

sunlight. The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote

control sensor of the plasma television is under direct sunlight

or strong lighting. In such case, change the angle of the

lighting or plasma television, or operate the remote control unit

closer to the remote control sensor.

• When any obstacle exists between the remote control unit and

the remote control sensor, the remote control unit may not

function.

• As the batteries become empty, the remote control unit can

function within a shorter distance from the remote control

sensor. Replace the batteries with new ones early enough.

30º

30º

Manual background Note

Remote control sensor

• The plasma television emits very weak infrared rays from its

screen. If you place such equipment operated through infrared

remote control as a VCR nearby, that equipment may not

receive commands from its remote control unit properly or

entirely. If this is the case, place that equipment at a location

far enough from the plasma television.

• Depending on the installation environment, infrared rays from

the plasma television may not allow this system to properly

receive commands from the remote control unit or may

shorten allowable distances between the remote control unit

and the remote control sensor. The strength of infrared rays

For the remote control sensor located on the PDP-428XDA, see Part names on page 12.

emitted from the screen differs, depending on images

displayed on the screen.

19

En

Page 19
Image 19
Pioneer PDP-508XDA, PDP-428XDA manual Preparation Operating range of the remote control unit, 30º 30º