Pioneer PDP-428XDA, PDP-508XDA Controlling other equipment using the supplied remote control unit

11Using with other equipment

Controlling other equipment using the supplied remote control unit

Using the supplied remote control unit, you can control other equipment in connection: a set-top box (STB), DVD player, DVD/ HDD recorder (DVR), BD player or VCR.

Before using this function, you need to preset the supplied remote control unit with the manufacture code of the equipment to be controlled. When you then want to control the equipment, press SELECT on the remote control unit to select an appropriate mode depending on the equipment; the selection is switched among TV, STB, DVD/DVR, and VCR. The corresponding mode indicators on the remote control unit show the currently selected mode.

• When you control a BD player, select the DVD/DVR mode.

Presetting manufacture codes

1Press SELECT on the remote control unit to select the STB, DVD/DVR, or VCR mode depending on the equipment.

2After confirming that the indicator of the previously selected mode goes off, press and hold SELECT, and then press 1 on the remote control unit.

•The corresponding mode indicator flashes.

3Press 0 to 9 to enter a three-digit manufacture code.

•See the manufacture code list to identify an appropriate code.

•The mode indicator lights up for approximately one second and then goes off; presetting the manufacture code is completed.

Note

•If you perform no operation for approximately one minute while a mode indicator is flashing, the code presetting procedure is quitted.

•If you enter a code not listed in the table, a mode indicator flashes quickly for approximately one second and then flashes as before.

•To quit the code presetting procedure halfway while a mode indicator is flashing, you may press SELECT on the remote control unit.

•The factory default manufacture codes for the STB, DVD/DVR, and VCR modes are “000”, “100”, and “500” respectively.

60

Manufacture codes

•Some equipment listed in the table may not allow you to control with the supplied remote control unit partially or entirely.

STB

000	PIONEER 1 (factory default)
001	PIONEER 2
002	AONVISION
003	ZINWELL
004	CANAL SATELLITE
005	HUMAX
006	PACE 1
007	PACE 2
008	QUALI-TV
009	SKY DIGITAL

DVD

100PIONEER 1 (factory default)

101PIONEER 2

102AKAI

103DENON

104HITACHI

105JVC

106KENWOOD 1

107KENWOOD 2

108PANASONIC 1

109PANASONIC 2

110PHILIPS 1

111PHILIPS 2

112SAMSUNG

113SHARP

114SONY 1

115SONY 2

116SONY 3

117THOMSON

118TOSHIBA

119YAMAHA

En