09Enjoying DTV broadcasts
Selecting an audio language
Use the following procedure to switch the audio language for the programme being watched.
1Press HOME MENU.
2Select “Setup” (/ then ENTER).
3Select “DTV Setup” (/ then ENTER).
4Select “Setup” (/ then ENTER).
5Select “Audio Setup” (/ then ENTER).
6Select “Audio Language” (/ then ENTER).
Digital Audio
Audio Language
Audio Language
Language (Mpeg)
7Select the desired audio language (/ then ENTER).
•You may not be able to select from two or more languages depending on the current programme.
8Press HOME MENU to exit the menu.
Note
•You can select “DTV Setup” only while viewing DTV channels.
•The audio language you select will only work when the broadcasting signal carries that language sound track.
•While viewing DTV channels, you can change the audio language by pressing
44
Displaying technical information
Use this function to check the hardware/software version number.
1Press HOME MENU.
2Select “Setup” (/ then ENTER).
3Select “DTV Setup” (/ then ENTER).
4Select “Setup” (/ then ENTER).
5Select “Software” (/ then ENTER).
6Select “Current Version” and press ENTER.
Current Version
System Information
H/W Version : ************
S/W Version : ************
Release Time : ************
7 Press HOME MENU to exit the menu.
Note
• You can select “DTV Setup” only while viewing DTV channels.
Screen Saver
The screen saver automatically starts when DTV radio channels are received.
Note
•Even when the screen saver is active, you can perform any operation.
En
