ENGLISH
7. SETTINGS
Feature Settings
A new sensor purchased as a separate accessory has to be introduced to the training computer. This is called teaching and takes only a few seconds. Teaching ensures that your training computer receives signals from your sensor only, and enables
When you activate a sensor in feature settings, Teach new sensor? is displaeyd. You can teach a new sensor by selecting Yes. Select No if the sensor has already been taught.
To teach a separately purchased H3 heart rate sensor, see Teach a New Heart Rate Sensor (page ).
Polar s3/s3+ Stride Sensor W.I.N.D.
To activate the stride sensor in your training computer, select Settings > Features > Shoes/bikes > Shoe 1/2/3 > On. Teach new sensor? is displayed.
•If your sensor is already taught, select No.
•If your sensor has not been taught yet, select Yes.
Before teaching, make sure that there are no other s3/s3+ stride sensors or G3/G5 GPS sensors nearby (40 m/131 ft). The sensor should be within 1,5 meters/5 ft of the training computer. Before entering a running event, for example, make sure to perform the teaching process at home, first. This is to prevent interference due to the
To return to time mode, press and hold the STOP button.
Polar Cycling Speed Sensor W.I.N.D.
To activate the speed sensor in your training computer, select Settings > Features > Shoes/bikes > Bike 1/2/3 > On > Speed > On. Teach new sensor? is displayed.
•If your sensor is already taught, select No.
•To teach a new sensor, make sure that there are no other speed sensors nearby (40 m/131 ft) and then select Yes.
After selecting Yes, rotate the wheel a few times to activate the sensor. The flashing red light indicates that the sensor is activated. Completed is displayed once the teaching process is over. The training computer is now ready to receive speed and distance data.
To return to time mode, press and hold the STOP button.
Wheel size settings are a prerequisite for correct cycling information. For more information on measuring the wheel size, see Measuring Wheel Size.
Polar Cadence Sensor W.I.N.D.
To activate the cadence sensor in your training computer, select Settings > Features > Shoes/bikes >
Bike 1/2/3 > On > Cadence > On. Teach new sensor? is displayed.
•If your sensor is already taught, select No.
32Settings